Quantum QP960H Manual de usuario descargar pdf (Pagina 15)

Quantum 960H DVR range manual V1.1

Connecting audio

To record audio on the DVR, connect to the audio source.

● Audio input : Connect to the audio out of the microphone.

To listen to live or recorded audio, connect to an amplified speaker system.

● Audio output : Connect to the audio in of the audio AMP.

Connecting to a network

Use the ethernet port to connect to remote PC via ethernet network.

Connecting to a sensor input

There are 16 individual alarm inputs marked as Sensor In (1-16).

● Sensor inputs : Connect to (+) terminal of a sensor.

● Common GND : Connect to (–) terminals of sensors.

Connecting to a alarm output

The DVR can activate external devices such as buzzers or lights using the relay.

There are 4 relay outputs marked as Alarm out.

● A1/A2/A3/A4 : Connect to (+) terminal of buzzer or light.

● B1/B2/B3/B4 : Connect to (–) terminals of buzzer or light.

Connecting to a PTZ camera

This RS485 connector can be used to control Pan / Tilt / Zoom camera.

Common

GND

Sensor

Inputs

(+)

(-)

Alarm

Outputs

Common

GND

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 97 98

Sin comentarios

Quantum QP960H Manual de usuario Pagina 15