Quantum 560UF/L Manual de usuario descargar pdf (Pagina 12)

CHAPTER 2. INSTALLATION

ACTIVE Professional External Modem User’s Manual

Example to set up DTE speed 57600 bps and modulation V.22 bis,

1. Set

Normal / Config.

Switch to PUSH position for Config. mode.

2. Set desired DTE speed 57600 bps

Method:

Toggle the

Switch to Menu 4 (DTE speed menu), the digit ‘4’

is shown on the LED segment. Then toggle the

Function

Switch to

Function 2 (speed 57600 bps is selected), the digit ‘2’ is shown on the

LED segment. Then press the

Enable

Switch to update the DTE

speed, The character ‘U’ is shown on the LED segment and all

parameters will be saved to profile 0 automatically.

3. Set modulation V.22 bis

Method:

Toggle the

Switch to Menu 3 (modulation menu), the digit ‘3’

is shown on the LED segment. Then toggle the

Function

Switch to

Function 4 (V.22 bis is selected), the digit ‘4’ is shown on the LED

segment. Then press the

Enable

Switch to update the modulation

setting, the character ‘U’ is shown on the LED segment and all

parameters will be saved to profile 0 automatically.

4. If more settings are required (i.e tx level, flow control, etc), repeat the

above steps. The above features were saved to profile 0

automatically).

5. To finish configuration by setting the

Normal / Config.

Switch to

POP position.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 44 45

Sin comentarios

Quantum 560UF/L Manual de usuario Pagina 12