Quantum DLT 8000 Guía de usuario descargar pdf (Pagina 11)

Chapter 1 Installation 3

b. Set the SCSI ID.

For systems or enclosures with a SCSI ID cable, install the SCSI ID cable as shown

FIGURE 1-2 and set the SCSI ID for the tape drive using the SCSI ID switch on

the system or enclosure.

FIGURE 1-2 SCSI ID Connectors

For systems or enclosures that do not have a SCSI ID cable, connect the jumpers

as shown in

FIGURE 1-3.

FIGURE 1-3 Setting SCSI ID Jumpers

Note – Although there are other switches and connectors on the tape drive, they are

inactive in Sun configurations.

SCSI ID

connectors

SCSI ID 0 SCSI ID 1 SCSI ID 2 SCSI ID 3

SCSI ID 4 SCSI ID 5 SCSI ID 6 SCSI ID 7

SCSI ID 8 SCSI ID 9 SCSI ID 10 SCSI ID 11

SCSI ID 12 SCSI ID 13 SCSI ID 14 SCSI ID 15

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 33 34

Sin comentarios

Quantum DLT 8000 Guía de usuario Pagina 11