Quantum P7000 Guía de usuario Pagina 76

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 75
Chapter 2 Basic Library Operations
Inserting Tape Cartridges into the Load Port
56 Quantum P4000 and P7000 Libraries User’s Guide
Inserting DLT and
SDLT Tape
Cartridges 2
DLT/SDLT tape cartridges are inserted into two removable 6-cartridge
magazines as shown in figure 15
on page 29. Tape cartridges may be
loaded to or unloaded from a magazine with the magazine in or out of
the library.
To insert a DLT tape cartridge into a magazine:
1 Prepare the tape cartridges to be inserted by affixing a bar code label
and write-protecting or write-enabling each cartridge as desired.
For more information about these procedures, refer to Installing Tape
Cartridges on page 32.
2 With the load port door open, place the tape cartridges in any
available load magazine slot (see figure 32
).
3 If the magazine is out of the load port, load the tape cartridges into
the magazine, then load the magazine into the load port.
The proper orientation for tape cartridge insertion is shown in DLT/
SDLT Cartridges on page 33 and LTO Cartridges on page 35.
4 Rotate the load port drum 180
o
so that the load port handle faces you
(see figure 31
)..
Note: To move cartridges to the load port for removal, refer to
Moving Cartridges
on page 68.
Vista de pagina 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 167 168

Comentarios a estos manuales

Sin comentarios