Quantum Scalar i40 Guía de usuario descargar pdf (Pagina 195)

Chapter 6: Performing Library Operations

Cleaning Tape Drives

Quantum Scalar i40 and Scalar i80 User’s Guide 167

3 Close the I/E station.

4 If manual cartridge assignment is enabled, the I/E Assign screen

displays on the operator panel. If manual cartridge assignment is

enabled, select the System partition.

5 Press Apply.

6 Continue using one of these options:

• Importing Cleaning Cartridges via the Operator Panel on

page 167

• Importing Cleaning Cartridges via the Web Client on page 167

Importing Cleaning Cartridges via the Operator Panel

1 Select Actions > I/E > Import Cleaning Tape.

A list of all the cleaning cartridges present in the I/E station displays.

2 If more than one cleaning cartridge is present in the I/E station, use

the Up and Down buttons to select a cleaning cartridge to import,

or select ALL to import all cleaning cartridges. The ALL option is

only available if there are enough empty cleaning slots in the library

to accommodate all the cleaning cartridges.

3 Press Import.

The library moves the cleaning cartridge to a previously configured

cleaning slot.

Importing Cleaning Cartridges via the Web Client

1 Select Operations > Cleaning Media > Import.

The Operations - Import Cleaning Media screen displays. This

screen contains a list of the cleaning cartridges in the I/E station. If

no cleaning slots are configured, a message displays stating that the

library cannot import cleaning cartridges.

2 Note the number of empty cleaning slots that appear in the Tot al

Empty Cleaning Slots field on the right side of the screen. The

number of cleaning cartridges you can import is limited to the

number of empty cleaning slots.

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 339 340

Sin comentarios

Quantum Scalar i40 Guía de usuario Pagina 195