Quantum DLT 8000 Guía de usuario descargar pdf (Pagina 50)

Benchmark DLT1 Drives & Media

Troubleshooting DLT1 Tape Drives

Chapter 33-16

Media Compatibility Issues

Table 3-5 lists potential error messages and what may cause them.

NOTE If you experience any failures with reused Quantum DLT formatted

(degaussed) cartridges, the degaussing may not have been sufficient to

fully erase the data. If this happens, use another piece of media

(preferably a new, unformatted DLT Type IV cartridge) before suspecting

other system components.

Table 3-5 Media Compatibility Issues

Message Cause

Media format invalid for

drive type.

An attempt was made to load

incompatible media into a DLT1 tape

drive. Ensure your media and format is

compatible with a DLT1 tape drive. (See

“Using DLT1 Tape Cartridges” on page

3-5.)

Media is write protected -

restore from tape

successful.

Media with the DLT 4000 format was

loaded into a DLT1 tape drive. The data

is readable but the media must be bulk

erased before a DLT1 tape drive can

write to this tape. (See “Bulk Erasing

Tape Cartridges” on page 3-6.)

Media is write protected -

restore from tape NOT

successful.

An attempt was made to load media

with a DLT 7000 or 8000 format into a

DLT1 tape drive. The format is

incompatible and the data cannot be

read. The media must be degaussed

before a DLT1 tape drive can write to

this tape. (See “Bulk Erasing Tape

Cartridges” on page 3-6.)

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 68 69

Sin comentarios

Quantum DLT 8000 Guía de usuario Pagina 50