Quantum SuperLoader 3 Manual de usuario descargar pdf (Pagina 5)

Tape Removal Without Removing the Top Cover 5

Quantum SuperLoader 3

2 At the bottom of the slot, push the latch out of the way to manually eject the

magazine (see Figure 5).

Figure 5 Inserting the Card to

Release the Latch (right

magazine removed for clarity)

Card

Latch

Cavity

3 Insert the card approximately 3 inches (75 millimeters) to release the magazine

latch.

4 After releasing the latch, use the handle to remove the magazine.

5 If a second magazine is present, insert the card into the slot on the opposite side to

release it.

Note: Magazine gear can only be engaged in one magazine at a time.

The left and right magazine cavities should now be empty.

If the card will not go in past 1 ½ inches, the magazine gear is probably blocking

access to the latch. Move the gear out of the magazine by rotating the turntable

(can be viewed through the empty cavity).

Caution: When rotating the turntable manually, be careful not to tear or

disconnect the flex circuit ribbon cable of the barcode reader (see

Figure 6).

1 2 3 4 5 6 7 8 9 10 ... 17 18

Sin comentarios

Quantum SuperLoader 3 Manual de usuario Pagina 5