Quantum DX5000 Guía de usuario Pagina 70

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 130
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 69
Chapter 3 DX3000 and DX5000 Remote Management
Configuration
Quantum DX3000 and DX5000 User’s Guide 52
Configuring System
Hardware
3
The DX3000/DX5000 system allows you to remotely configure the
following hardware options:
Configuring the Device Mappings
Configuring the iSCSI Options
Configuring the Fibre Channel Options
Configuring the RAID Settings
Configuring the Device Mappings 3
The Device Mapping page allows you to map or assign DX3000/DX5000
virtual devices (robot, tape drives, and virtual disks) to specific iSCSI or
Fibre Channel ports. The default setting for both the DX3000 and DX5000:
Ethernet port 1 is assigned the robot and tape drives 0 through 5.
To access the Device Mapping page:
1 In the Hardware page, click Device Mapping.
The management frame displays the Device Mapping page (see
figure 34).
Vista de pagina 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 129 130

Comentarios a estos manuales

Sin comentarios