Quantum LTO-2 Manual de usuario Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 94
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
Chapter 2 Installation and Quick Start
Installing an Internal LTO-2 Half-Height Tape Drive
LTO-2 Half-Height Tape Drive User’s Guide 13
Connecting a SCSI
Cable
2
The internal LTO-2 Half-Height Tape Drive has an Ultra3 SCSI interface,
terminated by an LVD SCSI connector. Use the following procedure to
connect a SCSI cable to this connector.
1 Turn off all power to the drive and the computer.
2 Attach the SCSI interface cable to the 68-pin SCSI interface connector
on the back of the drive (see figure 5
).
Figure 5 Rear View of
the Internal LTO-2
Half-Height Tape Drive
Caution: Install an LVD drive only in an LVD environment.
Plugging an LVD drive into an HVD bus makes the entire
bus non-functional and may permanently damage the
drive or other SCSI devices on the bus.
SCSI Jumper Block
Pin 1
Library Interface Connector
SCSI Connector
Power Connector
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 93 94

Comentarios a estos manuales

Sin comentarios