Quantum FC420 Guía de usuario descargar pdf (Pagina 13)

Quantum ATL M2500 Library User’s Guide Addendum—Prism FC420 Bridge Option

Document 6473031-01, Ver. 1, Rel. 1

August 2002

Updating FC420 Firmware 13

Updating FC420 Firmware 0

If the FC420 firmware requires updating, follow this procedure:

1 Obtain the latest copy of the firmware. To do this, go to

www.quantum.com/softwaredownload. Locate and download the

appropriate driver.

2 Establish an Ethernet cable connection from the computer with the

new FC420 driver to the Fibre Channel bridge to be updated as

explained in Setting Up an Ethernet Connection

on page 9.

3 From the computer, open a command prompt window and type

ftp [FC420 IP address] and then press <Enter>.

4 When prompted for a username, type sysadmin or the current

system administrator ID and press

<Enter>. When prompted for a

password, type

sysadmin or the current system administrator

password and press

<Enter>.

5 At the command line, type bin and then press <Enter>.

6 At the command line, type put [firmware filename] and then press

<Enter>.

Several messages appear on the screen. Finally, a success message

appears.

7 Type bye or quit and then press <Enter>.

8 Repeat steps 1 to 7 to update the firware of other FC420 Fibre

bridges installed in the library.

9 Restart the library.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Sin comentarios

Quantum FC420 Guía de usuario Pagina 13