Quantum FC420 Guía de usuario descargar pdf (Pagina 8)

Quantum ATL M2500 Library User’s Guide Addendum—Prism FC420 Bridge Option

Document 6473031-01, Ver. 1, Rel. 1

August 2002

8 Setting SCSI IDs

DLT8000 Drive Cabling 0

A single FC420 Fibre bridge installed in an ATL M2500 library with

DLT8000 tape drives can manage up to four drives per SCSI port.

Figure 5

shows a typical cabling configuration, with the SCSI

controller and three drives on one bus and three drives on the other

bus.

Figure 5 Typical Cabling

with DLT8000 Drives

Setting SCSI IDs 0

Use the information in table 1

to set the SCSI device addressing (SCSI

IDs) for the library.

Table 1 SCSI ID Settings

Note: To increase the bandwidth available to each drive, install

additional FC420 Fibre bridges and use the cabling

configuration shown in figure 3

or in figure 4.

Device SCSI ID Device SCSI ID

SCSI Controller 0 Drive 3 4

Drive 01Drive 45

Drive 12Drive 56

Drive 2 3

Drive 2 Drive 1

Drive 4 Drive 3

Drive 6 Drive 5

Slot for FC420

FC420

SCSI controller

SCSI

SAN

Fibre

M2500

Auxiliary

electronics

module

Primary

electronics

module

Term i n at o r

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 25 26

Comentarios a estos manuales

Sin comentarios

Quantum FC420 Guía de usuario Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Quantum FC420