Quantum P7000 Guía de usuario Pagina 57
- Pagina / 168
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 2 Basic Library Operations
Preparing the Library for Operation
Quantum P4000 and P7000 Libraries User’s Guide 37
Preparing the Library for Operation 2
To prepare the library for operation:
• Close the library doors and access panels
• Connect the host workstations
Closing the
Library Doors and
Access Panels 2
The library has two front doors (P7000 only) and three back access panels.
1 Close and lock the front doors.
a Close one door and then the other.
b Turn the door latches to secure the doors to the library frame.
c Lower the latches over the door locks.
d Using the key from the accessory kit, lock the latches in place.
2 Close and lock the back access panels using a 5/32 hex wrench (not
provided).
Connecting Host
Workstations 2
Connect the SCSI (or Ethernet) cables and jumpers as shown in the
applicable figures.
Figure 20
shows the recommended cabling configuration for a 8-drive
P4000 library.
Figure 21
shows the recommended cabling configuration for a 16-drive
P7000 library.
Figure 22
shows the Ethernet cabling configuration for a 10-drive P4000
library.
Figure 23
shows the Ethernet cabling configuration for a 16-drive P7000
library.
Note: Quantum ships sufficient SCSI cables and terminators with
this library to set up two-drives per SCSI bus, as well as
adequate SCSI jumper cables to accommodate up to 4 drives
per SCSI bus.
- User’s Guide 1
- Contents 3
- Glossary 137 7
- Index 143 7
- Audience 15
- Document 16
- Organization 16
- Notational 17
- Conventions 17
- Quantum Corporation 19
- P.O. Box 57100 19
- Irvine, CA 92619-7100 19
- (949) 856-7800 19
- (800) 284-5101 19
- Library Description 21
- Overview 27
- P4000 10/165 Model 1 30
- • Up to 10 tape drives 30
- •One load port 30
- Features and Benefits 1 39
- Library Components 1 40
- Library Components 41
- Figure 9 P4000 41
- Cabinet-Front View 41
- Figure 10 P7000 42
- Figure 11 P4000 43
- Cabinet-Back Panels 43
- Figure 12 P7000 44
- Cabinet - Back Panels 44
- Figure 13 GUI—Initial 45
- Screen (P7000) 45
- Basic Library Operations 51
- Installing Tape Cartridges 2 52
- Installing Tape Cartridges 53
- Slide-in slot 54
- DLTtape IV 55
- ABC123L1 56
- Drive Column 1 58
- SCSI ID 5 58
- Drive Column 0 59
- Drive Column 1 Drive Column 0 61
- Using the GUI 2 63
- Using the GUI 64
- Figure 24 GUI—Initial 64
- Obtaining Library Status 2 68
- Operator 73
- Operating the Load Port 2 74
- Figure 31 Rotating 77
- Unload button 79
- Insert/release 79
- (shown in up position) 79
- Operator Commands 81
- Opening the Operator Screen 3 82
- Configuring the Library 3 83
- Configure 84
- Overview Tapes Operator 84
- Configure: Library 84
- Configuring Library Options 3 86
- Performing an Inventory 3 88
- Moving Cartridges 3 88
- Backspace button: 89
- Unloading a Drive 3 90
- Unloading the Load Port 3 91
- Chapter 3 Operator Commands 92
- Unloading the Load Port 92
- Service Commands 93
- Opening the Service Screen 4 94
- Changing Passwords 4 95
- Generating Reports 4 96
- Generating Any 97
- Service Report 4 97
- Report: Statistics 98
- Actuator Report 4 99
- Figure 45 99
- SysTest Report 4 100
- Figure 46 100
- Testing the Library 4 101
- Chapter 4 Service Commands 104
- Multi-Unit Commands 105
- Multi-Unit 107
- Operator Service 107
- Troubleshooting 111
- Performing an 114
- Inventory on page 68) 114
- Library Specifications 117
- Physical Characteristics 1 118
- Environmental Specifications 122
- Relocating the Library 123
- Label with shipping 126
- Horizontal 128
- and figure 58) 129
- Figure 60 Inserting 131
- Crating the Library 2 132
- Crating the Library 133
- P7000 shown 134
- Automatic Drive Cleaning 137
- Selection of Cleaning Mode 3 138
- Reporting of Cleaning Mode 3 139
- Cleaning Cartridges 3 140
- Cleaning Cartridges 141
- Monitoring the Drives 3 142
- Media Movement to the Drive 3 143
- Unloading Cleaning Cartridges 145
- Laser Regulations 147
- LASERLIGHT 148
- DO NOT STARE INTO BEAM 148
- VORSICHT 148
- Regulatory Statements 149
- Taiwan Statement 5 150
- Japan Statement (VCCI) 5 150
- Laser Statement 5 152
- Battery Statement 5 153
- Declarations of Conformity 5 155
- Figure 66 P7000 156
- Declaration of 156
- Conformity 156
- Glossary 157
Relacionado con productos y manuales para Cargadores automáticos de cinta y bibliotecas Quantum P7000
(93 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.172 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales