Quantum ATL StackLink Guía de usuario Pagina 75
- Pagina / 222
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 3 Changing the Library Configuration
Changing a Tape Drive ID
ATL M-Series User’s Guide 57
To change a tape drive SCSI ID:
1 Access the Configuration screen (see Accessing the
Configuration Screen).
2 Press the Up or Down buttons until the desired drive ID (for
example,
Drive 1 ID) is highlighted.
3 Press Select.
4 Use the Up or Down buttons to select the desired SCSI ID.
Available settings are
0 through 15 and Disabled.
5 Press Select.
To return to the
Configuration screen without changing the
option setting, press
Cancel.
6 If desired, repeat steps 2 through 5 to set the SCSI ID for
another tape drive.
7 Press Main to return to the main screen.
Caution: Set the drive SCSI ID to Disabled only if the
drive is not installed in the library.
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.
Note: You must reboot the library before this setting will
take effect.
- User’s Guide 1
- Contents 3
- ATL M-Series User’s Guide v 5
- ATL M-Series User’s Guide vii 7
- ATL M-Series User’s Guide ix 9
- ATL M-Series User’s Guide xi 11
- Audience 13
- Document 13
- Organization 13
- Configuration screen 13
- Preface 14
- ATL M-Series User’s Guide xv 15
- SCSI-2 Specification 0 16
- Contacts 16
- Quantum Corporation 0 16
- Technical Publications 0 16
- Overview 19
- SCSI Configuration 1 20
- Library Scalability 1 20
- Library Features 1 23
- Chapter 1 Overview 24
- Library Features 24
- 6 ATL M-Series User’s Guide 24
- Figure 2 ATL M2500 24
- Front Panel 24
- Figure 3 26
- Figure 4 26
- ATL M-Series User’s Guide 9 27
- Figure 4 ATL M2500 27
- Internal Layout 27
- Back Panel 1 28
- ATL M-Series User’s Guide 11 29
- Figure 6 ATL M2500 29
- Back Panel 29
- 12 ATL M-Series User’s Guide 30
- Basic Operations 31
- Introduction 2 32
- Stack button (see figure 8) 33
- Level button 34
- GUI Buttons 2 35
- Chapter 2 Basic Operations 36
- Introduction 36
- 18 ATL M-Series User’s Guide 36
- Table 4 GUI Icons 36
- ATL M-Series User’s Guide 19 37
- 20 ATL M-Series User’s Guide 38
- Figure 12 Quick View 38
- Menu Screen 38
- Quick View Menu screen 39
- ATL M-Series User’s Guide 23 41
- Figure 15 Sample 41
- Inventory Screen 41
- ATL M-Series User’s Guide 25 43
- Figure 17 Sample 43
- Drive Power Screen 43
- Moving Tape Cartridges 2 44
- Using the Mailbox 2 48
- Using the Mailbox 49
- ATL M-Series User’s Guide 31 49
- 32 ATL M-Series User’s Guide 50
- Figure 23 Mailbox 50
- OPEN Screen 50
- ATL M-Series User’s Guide 33 51
- 34 ATL M-Series User’s Guide 52
- ATL M-Series User’s Guide 35 53
- 36 ATL M-Series User’s Guide 54
- ATL M-Series User’s Guide 37 55
- Removing the Magazines 2 56
- Removing the Magazines 58
- 40 ATL M-Series User’s Guide 58
- Figure 25 Magazine 58
- Release Button 58
- ATL M-Series User’s Guide 41 59
- Figure 26 Release 59
- Magazines Screen 59
- 42 ATL M-Series User’s Guide 60
- 44 ATL M-Series User’s Guide 62
- Figure 28 Release 62
- Viewing Statistics 2 64
- Viewing Library 65
- Statistics 65
- Viewing Statistics 66
- 48 ATL M-Series User’s Guide 66
- ATL M-Series User’s Guide 49 67
- Figure 33 Sample 67
- Drive Statistics Screen 67
- 50 ATL M-Series User’s Guide 68
- Figure 34 Sample 68
- SCSI History Screen 68
- Stack Configuration screen 69
- 52 ATL M-Series User’s Guide 70
- Changing the Library 71
- Configuration 71
- Press Config 72
- screen (see figure 37) 72
- Setting the Library ID 3 73
- Changing a Tape Drive ID 3 74
- Changing a Tape Drive ID 75
- ATL M-Series User’s Guide 57 75
- 58 ATL M-Series User’s Guide 76
- ATL M-Series User’s Guide 59 77
- 60 ATL M-Series User’s Guide 78
- ATL M-Series User’s Guide 61 79
- 62 ATL M-Series User’s Guide 80
- ATL M-Series User’s Guide 63 81
- 64 ATL M-Series User’s Guide 82
- ATL M-Series User’s Guide 65 83
- 66 ATL M-Series User’s Guide 84
- Setting the Time 3 85
- Setting the Date 3 86
- ATL M-Series User’s Guide 69 87
- ATL M-Series User’s Guide 71 89
- 72 ATL M-Series User’s Guide 90
- ATL M-Series User’s Guide 73 91
- 74 ATL M-Series User’s Guide 92
- ATL M-Series User’s Guide 75 93
- 76 ATL M-Series User’s Guide 94
- Performing Maintenance 95
- Operations 95
- Press Maint 96
- screen (see figure 40) 96
- Cleaning a Tape Drive 4 97
- 82 ATL M-Series User’s Guide 100
- Figure 44 Drive 100
- Power Screen 100
- Adjusting the Contrast 4 101
- Adjusting the Contrast 102
- 84 ATL M-Series User’s Guide 102
- Running Diagnostic 103
- Programs 103
- Press Diag 104
- The GUI displays the 104
- screen (see figure 47) 104
- ATL M-Series User’s Guide 87 105
- Figure 48 Diags: 105
- General Screen 105
- 88 ATL M-Series User’s Guide 106
- Figure 49 Diag: 106
- Barcode Screen 106
- Confirm 109
- 92 ATL M-Series User’s Guide 110
- 94 ATL M-Series User’s Guide 112
- Figure 55 Diag: Move 112
- Location Screen 112
- Running the Display Test 5 113
- Running the Display Test 114
- 96 ATL M-Series User’s Guide 114
- Running the 115
- Demonstration Programs 115
- 98 ATL M-Series User’s Guide 116
- Figure 56 Demo 116
- Programs Screen 116
- Running the Demo 1 Program 6 117
- Running the Demo 2 Program 6 118
- Running the Demo 3 Program 6 119
- Running the Demo 4 Program 6 120
- Running the Demo 5 Program 6 121
- Running the Demo 6 Program 6 122
- Specifications 123
- Physical Specifications 1 124
- Appendix A Specifications 125
- Physical Specifications 125
- ATL M-Series User’s Guide 107 125
- Performance Specifications 1 126
- Performance Specifications 127
- ATL M-Series User’s Guide 109 127
- Reliability Specifications 1 128
- Tape Drive Specifications 1 128
- Environmental Specifications 130
- 112 ATL M-Series User’s Guide 130
- Fault Symptom Code 131
- (FSC) Dictionary 131
- 114 ATL M-Series User’s Guide 132
- ATL M-Series User’s Guide 115 133
- 116 ATL M-Series User’s Guide 134
- ATL M-Series User’s Guide 117 135
- 118 ATL M-Series User’s Guide 136
- ATL M-Series User’s Guide 119 137
- 120 ATL M-Series User’s Guide 138
- ATL M-Series User’s Guide 121 139
- 122 ATL M-Series User’s Guide 140
- ATL M-Series User’s Guide 123 141
- 124 ATL M-Series User’s Guide 142
- ATL M-Series User’s Guide 125 143
- 126 ATL M-Series User’s Guide 144
- ATL M-Series User’s Guide 127 145
- 128 ATL M-Series User’s Guide 146
- ATL M-Series User’s Guide 129 147
- 130 ATL M-Series User’s Guide 148
- ATL M-Series User’s Guide 131 149
- 132 ATL M-Series User’s Guide 150
- ATL M-Series User’s Guide 133 151
- 134 ATL M-Series User’s Guide 152
- ATL M-Series User’s Guide 135 153
- 136 ATL M-Series User’s Guide 154
- ATL M-Series User’s Guide 137 155
- 138 ATL M-Series User’s Guide 156
- ATL M-Series User’s Guide 139 157
- 140 ATL M-Series User’s Guide 158
- ATL M-Series User’s Guide 141 159
- 142 ATL M-Series User’s Guide 160
- ATL M-Series User’s Guide 143 161
- 144 ATL M-Series User’s Guide 162
- ATL M-Series User’s Guide 145 163
- 146 ATL M-Series User’s Guide 164
- ATL M-Series User’s Guide 147 165
- 148 ATL M-Series User’s Guide 166
- ATL M-Series User’s Guide 149 167
- 150 ATL M-Series User’s Guide 168
- ATL M-Series User’s Guide 151 169
- 152 ATL M-Series User’s Guide 170
- ATL M-Series User’s Guide 153 171
- 154 ATL M-Series User’s Guide 172
- ATL M-Series User’s Guide 155 173
- 156 ATL M-Series User’s Guide 174
- ATL M-Series User’s Guide 157 175
- 158 ATL M-Series User’s Guide 176
- ATL M-Series User’s Guide 159 177
- 160 ATL M-Series User’s Guide 178
- DLTtape Cartridge 179
- Maintenance 179
- When To Visually 180
- Inspect a DLTtape 180
- Cartridge 180
- ATL M-Series User’s Guide 165 183
- Figure 59 Write 183
- Protect Switch 183
- 166 ATL M-Series User’s Guide 184
- Regulatory Statements 185
- English 4 186
- Laser Statement 4 187
- Deutsch 4 188
- Regelungen für Taiwan 4 189
- Laser-Erklärung 4 190
- Español 4 191
- Declaración para Taiwán 4 192
- Declaración sobre láser 4 193
- Français 4 194
- Réglementation de Taïwan 4 195
- Français 196
- 178 ATL M-Series User’s Guide 196
- Italiano 4 197
- Dichiarazione per Taiwan 4 198
- Avvertenza CISPR 199
- Svenska 4 200
- Meddelande för Taiwan 4 201
- Kanada (digital utrustning) 4 201
- Lasermeddelande 4 202
- Simplified Chinese 4 203
- CISPR-22 4 204
- MC300 4 205
- Traditional Chinese 4 206
- Japanese 4 208
- Industry Canada 4 209
- Japanese 210
- 192 ATL M-Series User’s Guide 210
- Korean 4 211
- Declaration of Conformity 4 214
- Declaration of Conformity 216
- 198 ATL M-Series User’s Guide 216
- Glossary 217
- 200 ATL M-Series User’s Guide 218
- 204 ATL M-Series User’s Guide 222
Relacionado con productos y manuales para Cargadores automáticos de cinta y bibliotecas Quantum ATL StackLink
(126 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.054 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales