Quantum LTO 1 Información técnica descargar pdf (Pagina 13)

Installing the LTO Driver Software 13

LTO-3 Half-Height Tape Drive

5 Reconnect the workstation or server system AC power cord to the facility AC power

receptacle.

After connecting the tabletop drive interface and AC power cables, proceed to Restarting

the Tabletop Tape Drive System in the following subsection.

Restarting the Tabletop

Tape Drive System 0

After connecting the tabletop drive interface and AC power cables:

1 Set the tabletop drive AC power switch to the on position.

2 Restart the workstation or server system.

3 Verify that the tabletop LTO-3 Half-Height Tape Drive comes on and completes the

Power On Self Test (POST) functions.

As required, proceed to either:

• I

nstalling the LTO Driver Software

• Registering the LTO-3 Half-Height Tape Drive

Installing the LTO Driver Software

If you intend to use the LTO-3 Half-Height Tape Drive with the Microsoft

native backup

applet on a Windows 2000, Windows Server

2003, Windows XP

, or Windows Vista

operating system, install the appropriate version of the LTO driver software. (See the

Downloads page for LTO-3 drivers under Standalone Tape Drives on the Quantum

support website at: www.quantum.com/support

Registering the LTO-3 Half-Height Tape Drive

After installing the LTO-3 Half-Height Tape Drive, be sure to register it via the Quantum

website at:

www.quantum.com/registration

Registering the drive ensures that you will receive the latest technical information about

the drive, as well as other product, service, and support information.

Note: The LTO driver software is not necessary with commercial backup application

software.

1 2 ... 8 9 10 11 12 13 14 15 16

Sin comentarios

Quantum LTO 1 Información técnica Pagina 13