Quantum P1000 Guía de usuario Pagina 86

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 132
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 85
Chapter 4 Operator Commands
Unloading a Drive
70 ATL P1000 Series User’s Guide
Unloading a Drive
4
The Unload Drive command prepares a tape cartridge to be ejected
from a drive by disengaging the tape from the read/write heads and
rewinding it. After unloading the drive, eject and remove the cartridge
using the Move Cartridges command (see “Moving a Cartridge” on
page 64).
To unload a drive:
Procedure
1
On the Operator screen, press the Drive Unload button.
The GUI displays the Control: Unload Drive screen (see figure 44).
Figure 44 Control: Unload
Drive Screen
2
Use the arrow buttons to highlight the desired drive.
3
Press the Execute button.
The GUI displays a “Command In Progress” screen and the library
unloads the drive.
To cancel the Unload Drive command, press the Abort button.
4
Press the Back button to return to the Operator screen.
Overview Tapes Operator
Back Forward
Home
O
Control: Unload Drive
System
Off-line
Standby
Load Port
Load Pack
Stop
Execute
Drive 0
ATL
PRODUCTS
Vista de pagina 85
1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 131 132

Comentarios a estos manuales

Sin comentarios