Quantum Scalar 100 Guía de usuario Pagina 30

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 130
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 29
22 Setting up your Scalar 100
12 If you have multiple drives of this type, click OK at each prompt to install the driver for each device.
13 When the driver has been installed for all devices, in the Tape Devices dialog box, select OK.
14 Restart the host server or workstation.
15 After restarting, in the control panel, double-click the Tape Devices icon and verify that the drivers were
properly loaded by locating them in the Windows Device Manager.
Verifying Communication with the Host
Read the following to learn how to verify communication between the library and the host. For more
information on verifying the connection of SCSI devices, consult the operating system documentation.
Verify the connection between the library and host system by making sure that the operating system
of the host server recognizes the library. In Microsoft® Windows®, this is done as follows:
In Windows NT®: Settings > Control Panel > SCSI Devices
In Windows 2000: Settings > Control Panel > System > Hardware > Device Manager > Tape
Drive or Medium Changers
Vista de pagina 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 129 130

Comentarios a estos manuales

Sin comentarios