Quantum PX502 Guía de usuario descargar pdf (Pagina 9)

PX502 Tape Library Quick Start Guide

Figure 13 PX502 Cable

Configuration (SCSI System

Controller Board)

Figure 14 PX502 Cable

Configuration (Surrogate)

Figure 15 PX502 Cable

Configuration (Native Fibre

Channel)

2 Connect one end of an AC power cable to each

installed power supply and to a wall outlet.

OTE: When operating in surrogate mode, the SCSI host

connection must be made to tape drive 1.

Back of Library

SCSI host

Ethernet

Power

SCSI System Controller Board

Tape drive 1Tape drive 2

Back of Library

SCSI hostEthernet

Power

Surrogate System

Controller Board

Tape drive 2 Tape drive 1

Back of Library

Fibre Channel

host/SAN

Ethernet

Power

Tape drive 2 Tape drive 1

Tape Drive Fibre

Channel host ports

Initial Configuration 0

Initially configuring the library consists of the following

steps:

• Turning on the Library

• Removing the Remaining Packing Materials

• Setting the Library Options

• Setting the Date and Time

• Setting Network Information

Turning on the Library

To turn on the library:

1 Verify that:

• Power cables are firmly in place

• All doors are closed and latched

2 Turn on the library by pushing power button located on

the bottom left-hand corner of the OCP (see figure 16

Figure 16 Turning on the Library

The power up sequence can take several minutes. The

first message displaying will be “Are the internal

packaging materials removed?” Continue with

Removing the Remaining Packing Materials

Now that you have installed the library chassis and powered

on the system, you MUST remove the remaining packing

materials from the library chassis before the library is

operational.

Power button

OCP

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comentarios a estos manuales

Sin comentarios

Quantum PX502 Guía de usuario Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Quantum PX502