
Pathlight VX User’s Guide 19
Shutting Down the Pathlight VX
Shutting down the Pathlight VX consists of two tasks:
• Shutting Down the System Software and the MS
• Shutting Down the Hardware on page 21
Shutting Down the System Software and the MS
Use this procedure to shut down the system software and the MS.
1 Log on the MS.
Refer to Virtual Library Summary
on page 27.
2 On the Pathlight VX Home page, select Operations→ System Shutdown.
CAUTION
Rebooting the Pathlight VX causes access to virtual libraries to be
interrupted.
Note
To shut down the Pathlight VX, you must be a user with Administrator
privileges.
Note
Note the following before shutting down the Pathlight VX:
• The SNC does not have power buttons. Each SNC uses either 1 or 2 power cords.
The power is controlled by plugging each power cord either in or out of an AC
power source.
• If the DPEs or DAEs do not have power buttons, the power is controlled by
plugging each power cord either in or out of an AC power source.
System
Shutdown
Comentarios a estos manuales