Quantum FastStor 2 Guía de usuario descargar pdf (Pagina 28)

28 6-00515-03 Rev A

If the tape drive has a cartridge loaded, the top line displays Drive loaded. The cartridge currently

loaded in the drive is indicated by an alternating black block and the slot number. This display can

also indicate that the specified cartridge is being loaded, unloaded, imported, or exported. The

autoloader status line indicates the current operation. See

Figure 5-2 for an example.

Figure 5-2 Home Screen, Drive Loaded

Abnormal Display

An exclamation point (!) displayed in the inventory indicates that the autoloader has identified a

cartridge in the indicated slot that is either an invalid cartridge type, or has had a media-related

error. These can be caused by faulty media, or dirty read/write heads in the tape drive. The Media

Attention LED indicator is also illuminated in this case. See

LED Indicators for more information.

Exporting the indicated cartridge will clear the error condition. See Exporting Cartridges. If these

symptoms occur on multiple known good cartridges, consider cleaning the tape drive. See

Cleaning the Tape Drive. If a particular cartridge causes these symptoms repeatedly, that

cartridge may be defective or invalid.

LED Indicators

The Operator Panel includes four LED indicators that provide a variety of information as detailed in

the following table.

Table 5-1 LED Indicators

LED Color Description

Ready/Activity Green Illuminated when power is on. Blinking whenever there is

tape drive or autoloader robotics activity.

Clean Drive Amber Illuminated when the tape drive has determined that a

cleaning cartridge should be used (see Cleaning the

Tape Drive). Additional cleaning of the tape drive is not

necessary.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 67 68

Sin comentarios

Quantum FastStor 2 Guía de usuario Pagina 28