Quantum FastStor 2 Guía de usuario descargar pdf (Pagina 41)

Using System Test 41

Using a Firmware Upgrade Tape

This option performs a firmware code update to the drive using a firmware upgrade tape previously

created using a separate procedure.

To upgrade firmware with a firmware upgrade tape

1. From the Home Screen or main menu, press + or – until Configuration appears on the top line

of the LCD screen.

2. Press ENTER to select.

3. Press + or – until the Code Update message appears on the LCD screen, and then press

ENTER to select.

4. If the carousel is full, do the following:

• When the LCD screen displays the No slot free for transfer message, press CANCEL

repeatedly until the main menu or Home Screen is displayed.

• Export a cartridge to make room for the firmware update cartridge (see Exporting

Cartridges for instructions), and then return to step 1 to update the firmware.

5. If the carousel is not full, do the following:

• The autoloader selects the first available slot and prompts you to insert the code update

tape.

6. Insert the firmware upgrade tape into the mail slot.

7. During the firmware update, which can take several minutes, the Drive SW update busy...

message appears on the LCD screen. When firmware update is complete, the autoloader

resets, then unloads and exports the code update cartridge. Remove the code update cartridge

and press ENTER when the LCD screen prompts you to do so.

8. If you exported a data cartridge to make room for the code update cartridge, be sure to import

the cartridge to its original slot.

See Importing Cartridges for instructions.

Using System Test

The System Test option cycles the autoloader through the process of loading, calibrating, and

unloading all cartridges in the carousel.

NOTE:

This code update operation assumes that the upgrade tape is imported as part

of this procedure. Do not import the firmware update cartridge before starting

this procedure.

NOTE:

After a firmware update, the firmware revision displayed on the LCD will not

be updated until the autoloader is power cycled.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 67 68

Sin comentarios

Quantum FastStor 2 Guía de usuario Pagina 41