Quantum P3000 Guía de usuario Pagina 43

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 146
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 42
Chapter 2 Basic Library Operations
Turning the Library On and Off
Quantum|ATL P3000 Series User’s Guide 23
Turning the Library On and Off
2
This section explains how to:
•Turn on the library
Place the library on-line or off-line
Turn off the library
Test the installation
Turning On the
Library
2
To turn on the library:
1
Verify that:
Power cables are firmly in place
All doors are closed
2
Turn on the power switch located behind the small sliding
door below the GUI.
3
After several seconds, verify that the current state of the library
(“System On-line” or “System Off-line”) appears in the System
State display on the GUI (see figure 12
).
Placing the Library
On-line or Off-line
2
With the library turned on, press the Standby button on the GUI.
Pressing the Standby button toggles the library between on-line
and off-line states.
Turning Off the
Library
2
To turn off the library:
1
Place the library off-line by pressing the Standby button.
The library robotics completes any current commands and then
stops.
2
Verify that the GUI display indicates “System Off-line.”
Vista de pagina 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 145 146

Comentarios a estos manuales

Sin comentarios