Quantum PX502 Guía de usuario Pagina 136

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 294
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 135
Chapter 3 Quantum PX500 Series Remote Management
Setup
Quantum PX500 Series User’s Guide 113
SCSI/Fibre 3
This section allows the user to set the SCSI IDs for the changer (library)
and every tape drive within the library and also configure any Fibre
Channel tape drives.
1 To access the SCSI/Fibre page, from the Setup page, click on the SCSI/
Fibre
tab at the top of the page.
The SCSI/Fibre page displays (see figure 76).
Figure 76 SCSI Page
2 To change a SCSI ID, enter the ID number in the field next to the
device and click
Apply.
To change a drive SCSI ID, the cabinet must be off-line. To change a
cabinet (changer) SCSI ID, the library must be rebooted before the
new ID takes effect.
3 Click the device (tape drives) to view the drive details.
Native Fibre Channel Tape Drives 3
To configure the Native Fibre channel topology, speed, and loop ID:
1 Click on the Fibre link under the Connectivity type.
Vista de pagina 135
1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 293 294

Comentarios a estos manuales

Sin comentarios