Quantum PX502 Guía de usuario Pagina 221

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 294
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 220
Appendix B SDLTtape Cartridge Maintenance
Visual Inspection of DLTtape Cartridges
Quantum PX500 Series User’s Guide 198
2 Gently shake the tape cartridge. Listen for any rattling of loose pieces
inside the cartridge.
3 Locate the reel lock openings (see figure 102) and verify that you can
see the reel locks.
The reel locks are small plastic tabs near the center of the reel lock
openings. They can be broken if the cartridge is dropped.
Figure 102 Location of the
Reel Locks and the Hub
4 Verify that the spring-loaded hub (see figure 102) is centered within
the circular opening in the tape cartridge.
5 Gently press the hub, then release it. Make sure the hub springs back
into place and is still centered within its circular opening.
6 Open the tape cartridge door (see figure 103):
a Gently press up on the tab at the right side of the tape cartridge
door.
b Swing the door open.
Caution: If you hear anything loose inside the cartridge, do not
use the cartridge.
Caution: If the reel locks are not visible, do not use the
cartridge.
Reel lock
opening
Reel lock
opening
Spring-
loaded hub
Vista de pagina 220
1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 293 294

Comentarios a estos manuales

Sin comentarios