Quantum L500 Guía de usuario Pagina 41

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 120
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 40
Chapter 2 Installing the L500 Series Library
Configuring the Tape Library
Quantum|ATL PowerStor L500 Series Tape Library Users Guide 25
Configuring the Tape Library
2
This section describes how to configure the library. Configuration
consists of verifying SCSI ID settings for the library and all drives.
Figure 19
shows the location of the OCP on the front panel of the
tape library. Verify all SCSI IDs using the OCP. If necessary, change
the IDs (see Changing SCSI ID Settings
).
Figure 19 Front Panel
(rack mount)
The system uses SCSI IDs to identify or address devices, such as
the library card and the tape drives, on the SCSI bus.If the library is
one of multiple SCSI devices on the bus, use a SCSI ID that is
unique from any other device or system ID on the SCSI bus.
Table 2
lists the default SCSI IDs. Figure 17 on page 22 shows
physical SCSI device locations.
LCD
PREVIOUS SELECT
ENTERNEXT
OCP
Magazine 0 Door
(Slots 0 - 6
)
Magazine 1 Door
(Slots 7 - 13
)
Vista de pagina 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 119 120

Comentarios a estos manuales

Sin comentarios