Quantum GoVault Guía de usuario Pagina 44

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 91
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 43
Chapter 3 Operation
Write Protecting Cartridges
GoVault™ for Windows User’s Guide 32
Write Protecting Cartridges
GoVault cartridges have a two-position write-protect switch that enables
and disables write access to the disk (see figure 19
):
The default configuration of the write-protect switch on GoVault
cartridges is the unlocked (write-enabled) position.
Figure 19 Cartridge Write
Protect Switch
In this position . . . The write function is . . .
unlocked enabled.
Data can be both written to and read from the
cartridge.
locked disabled (write protected).
Data can be read from the cartridge, but not
written to it.
Note: The Windows operating system
displays an error message if you try
writing to a write-protected cartridge.
Note: On Windows 2000 systems, you cannot use the write-protect
function on GoVault cartridges that are formatted with the
New Technology File System (NTFS).
Accessing a write-protected NTSF cartridge on a Windows
2000 system produces an error message indicating that the
drive is not accessible, and you will not be able to read any
data from the cartridge.
Write-protect switch
(shown in the unlocked position)
Vista de pagina 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 90 91

Comentarios a estos manuales

Sin comentarios