Quantum DLT 4700 Guía de instalación descargar pdf (Pagina 19)

Configuring Your IP4700 Device for Use with Backup Software

Configuring Veritas NetBackup Software

3. In the Add Drive window, make sure that the NetBackup master

server is listed as device host, and specify the following:

a. In the Drive Type field, select the correct drive for your

configuration, for example, DLT or 8mm Cartridge.

b. In the Drive Name field, type a descriptive name for the drive,

for example, dlt-1.

c. In the Device Name field, specify hostname:drivename, where

hostname is the host name of the SP, and drivename is the

drive name obtained by clicking Tape Devices in the IP4700

graphical user interface.

The following example shows the possible configuration of a

drive on SP B.

4. Click OK.

Creating a Storage

Unit

A storage unit is simply a collection of similar tape drives. To create a

storage unit, follow these steps:

1. From the NetBackup Administration window, click Storage Unit

Management.

2. Select Storage Unit

→ New.

3. At the Add a New Storage Unit prompt, type a name for

your storage unit.

In the name, indicate the type of storage unit you are creating, for

example, PC_name_DLT_SU1. The Add New Storage Unit

window appears.

4. In the general properties window, select NDMP as the storage

unit type.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 57 58

Sin comentarios

Quantum DLT 4700 Guía de instalación Pagina 19