Quantum DLT 4700 Guía de instalación descargar pdf (Pagina 55)

Configuring Your IP4700 Device for Use with Backup Software

Best Practices

best backup and restore performance, and does not degrade the

network performance of the clients while backup or restore is

occurring.

We also recommend that each client have a dedicated network

adapter, either 100 Mbytes per second or 1000 Mbytes per second,

that is connected to the private network. Some adapters and/or

operating systems do not support link aggregation. If two Gigabit

Ethernet adapters are in the same network, you must specify which

Gigabit Ethernet adapter you want the backup server to use when

backing up a client. Refer to you backup software documentation for

information about specifying this. We recommend that you plan

ahead to evenly distribute the network traffic throughout the two

Gigabit network adapters.

Naming the Private Network LAN IP

Since both the backup server and all the backup clients have

connection to the public/corporate network, the corporate Windows

Internet Name Service (WINS) or Domain Name System (DNS)

servers manage the name resolutions. You do not need to set up a

name resolution mechanism in the private network, but we

recommend that all private network LAN IP names have the same

prefix or suffix for easy administration. For example, if the client’s

public hostname is client1, the private network LAN IP name should

be BUCclient1 or client1BUC.

Using Bar Codes in

the Jukebox

Along with your jukebox, you probably received a collection of bar

codes. You must remove each bar code label and insert it into the

front edge of the tape cartridge. Be sure that it faces right side up and

is secure, so that it will not slide back out.

CAUTION

Do not place anything else on a tape cartridge. Sticky labels on the

tape may come off inside the tape drive, requiring repair that is not

covered under warranty.

These machine-produced bar codes with characters you can read

make it easy to find a particular cartridge if you need to. They also

significantly reduce the amount of time it takes the jukebox to come

on line when power is restored or a door is closed due to bulk

loading. They also speed up the backup server inventory operation

because the bar code label is read through the jukebox SCSI interface,

which identifies a tape even if the physical location within the

1 2 ... 50 51 52 53 54 55 56 57 58

Sin comentarios

Quantum DLT 4700 Guía de instalación Pagina 55