Quantum Scalar 50 Manual de usuario descargar pdf (Pagina 14)

Quantum Scalar 50 Tape Drive Installation Instructions

Document 81-81769-02 A01

July 2008

14 Setting the Tape Drive SCSI ID

6 To change a SCSI ID, enter the ID number in the field next to the device

and click

Apply.

7 From the

Operations page, click on the Drives tab.

The

Drives page displays (see figure 16):

Figure 16 Drives Page

8 Enter the new tape drive number

9 Select

shutdown and click Apply.

The tape drive powers down.

10 Enter the new tape drive number

11 Select

Power on and click Apply.

The tape drive powers on. The tape drive installation is complete.

Note: SAS tape drives do not require a SCSI ID and cannot be

configured. Use the default tape drive configuration

information.

Note: The firmware revision on the new tape drive(s) must match the

firmware revision on the currently installed tape drives (of the

same tape drive type). If the new tape drive has a different

revision, you must download the appropriate tape drive firmware

from Quantum and update the drive. All tape drives in the library

must contain the same firmware revision. You can view the tape

drive firmware revision on the OCP under

Drive Operations.

Drive operations

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Sin comentarios

Quantum Scalar 50 Manual de usuario Pagina 14