Quantum 200D/400D Guía de usuario Pagina 52

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 65
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 51
40 Troubleshooting and Diagnostics
Clear Error Log
To select the Clear Error Log function, perform the following steps:
1. Verify that the drive is in Maintenance Mode shown when the Status LED is solid amber.
2. Press the Unload button once per second until the front panel indicators display the following:
Indicator State, Character, or Message
Status LED
Amber, solid
Single-character display
a
LCD
Maint Mode: Select
Clear Error Log
3. Press and hold the Unload button for two seconds to select Clear Err Log.
The drive erases all errors from the error log, and the front panel indicators briefly display the following:
Indicator State, Character, or Message
Status LED
Amber, solid
Single-character display
a, flashing
LCD
Clear Error Log
Completed!
Then your LTO standalone exits Maintenance Mode, and the front panel indicators display the following:
Indicator State, Character, or Message
Status LED
Green, solid
Single-character display Off
LCD
Ultrium Tape Drive
Drive Empty
Test Cartridge and Media
Use this function to perform tests to ensure that a suspect cartridge and its magnetic tape are acceptable.
To select the Test Cartridge & Media function, perform the following steps:
1. Verify that the drive is in Maintenance Mode shown when the Status LED is solid amber.
2. Press the Unload button once per second until the front panel indicators display the following:
Indicator State, Character, or Message
Status LED
Amber, solid
Single-character display
e
LCD
Maint Mode: Select
Test Media
Vista de pagina 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 64 65

Comentarios a estos manuales

Sin comentarios