Quantum PX506 Manual de instalación descargar pdf (Pagina 27)

Quantum PX506 and PX510 Unpacking and Installation Instructions

Document 81-81338-01 D01

June 2005

Installing the Library 27

4 Secure the back of the library to the rack with two mounting clamps and

and two Allen screws on each clamp. The mounting clamps are oriented

differently depending on the depth of the rack (see figure 20

5 Secure the mounting clamps to the rack rails with two PHILLIPS screws

on each side (see figure 20

Figure 20 Securing the

Back of the Library

6 Install the power supplies previously removed. Tighten the captive

screws with a flat blade screw driver.

7 To install the tape drives into the library:

a Remove the tape drive cover plates by loosening the captive screws

securing the plate to the library chassis with a flat blade screwdriver

(see figure 21

Note: If the rack depth is 27 to 30 in., the long portion of the clamp is

mounted to the back. If the rack depth is 30 to 36 in., the long

portion is mounted to the front.

Allen

screws

Long

portion

PHILLIPS

screws

PX506 shown

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

Sin comentarios

Quantum PX506 Manual de instalación Pagina 27