Quantum PX506 Manual de instalación descargar pdf (Pagina 34)

Quantum PX506 and PX510 Unpacking and Installation Instructions

Document 81-81338-01 D01

June 2005

34 Installing the Library

Table 4 Setting Up the

Cabinet

Setting the Date and Time 0

To set the date and time:

1 From the

Setup screen, use the up and down arrows to highlight Date and

Time

and press Enter.

The

Date and Time screen displays (see figure 29):

Figure 29 Date and Time

Screen

The Date and Time screen displays the following information about the

library:

2 Use the up and down arrows to view or edit the date and time

information. Press

Enter to accept the new settings.

3 When you are finished viewing/editing the date and time information,

press

Exit to return to the Setup screen.

Cabinet Options Description

Host bus Sets the SCSI ID for both the library

and tape drives.

Stack role Assigns the library stack role as

Master, Slave, or Stand alone. There

can be only one Master library in a

multiple stack. Once configured as a

slave, all library OCP functions can be

controlled via the Master library OCP.

The library model number will also

change to PX500S indicating a stacked

library configuration. The library

model number is available from the

home screen on the Master library

OCP.

Left load port Enables or disables the left load port

Right load port Enables or disables the right load port

Auto inventory Enables or disables the auto inventory

function. When enabled, the library

automatically inventories the library

contents when going “On-line”.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Comentarios a estos manuales

Sin comentarios

Quantum PX506 Manual de instalación Pagina 34

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Quantum PX506