Quantum PX506 Manual de instalación descargar pdf (Pagina 35)

Quantum PX506 and PX510 Unpacking and Installation Instructions

Document 81-81338-01 D01

June 2005

Installing Additional Libraries 35

Setting Network Information 0

To view or edit the network information:

1 From the

Setup screen, use the up and down arrows to highlight Network

and press

Enter.

The

Network screen displays (see figure 29):

Figure 30 Network Screen

The Network screen allows you to view or edit the following network

settings:

•DHCP

•IP address

•Subnet mask

• Default gateway

2 Use the up and down arrows to select the network setting you wish to

view or edit and press

Enter.

When you are finished viewing/editing the network information, press

Back to return to the Setup screen. The library is initially configured and

ready for use. Refer to the PX500 Series User’s Guide (PN 81-81290) for

information on diagnostic tests.

Installing Additional Libraries 0

The PX506 and PX510 library modules can be used as stand-alone libraries, or

combined with other PX500 Series library modules in a standard 19-inch rack

to form a larger library system (called a multiple library stack). The multiple

library stack appears as a single large capacity library to the host and can pass

cartridges through the library.

Installing additional libraries and configuring for a multiple library stack

consists of the following steps:

• Removing the FlexLink Covers

Note: Close the service call and register the installation with

Quantum customer support.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

Sin comentarios

Quantum PX506 Manual de instalación Pagina 35