Quantum TC2201E Guía de usuario descargar pdf (Pagina 137)

Perform Configuration

Quantum TC2201E User’s Guide 117

•Select 3 to enable/disable SCSI Bus Reset on Boot. When enabled, the

TC2201E will automatically reset SCSI buses after initial power up

and after reboots.

•Select 4 to set the discovery delay time for SCSI devices. This is the

time the TC2201E waits after a power-up or reboot before starting to

discover SCSI devices. This value should be set to no less than 250ms,

according to the SCSI standard for Reset-to-Selection Time. Quantum

recommends you set the value to at least 2 seconds to ensure all SCSI

devices complete their individual power-ups. With Discovery

enabled, the Discovery Delay will lengthen the time taken by the

TC2201E to reboot.

•Select 5 to edit the SCSI Target override settings. After selection of

this option, a prompt appears to choose the particular Target ID (0

through 15) to edit. Select the appropriate Target ID and then the

SCSI Override Configuration Menu will appear.

SCSI Initiator Menu 3

This option allows for setting up the SCSI Initiator.

Note: Normally, override settings should not be changed except when

directed to do so by an authorized Quantum technician.

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 201 202

Sin comentarios

Quantum TC2201E Guía de usuario Pagina 137