Quantum TC2201E Guía de usuario descargar pdf (Pagina 178)

Get a Copy of Trace Buffer or Event Log

158 Quantum TC2201E User’s Guide

Get a Copy of Trace Buffer or Event Log 4

Using the following procedure, you can save copies of the trace buffers or

the event logo over FTP.

1 Connect the TC2201E to the ethernet network used by your

computer.

2 Start your FTP program using the TC2201E’s IP address:

ftp <IP address>

The default IP address is 1.1.1.1.

3 Enter the user name and password. The default values for user name

and password are root for the user name and password for the

password.

4 Specify Bin mode:

bin

5 Specify the filename (.txt file) with the get command.

For the current trace buffer, use get curtrace.txt.

For the previous trace buffer, use get prvtrace.txt.

For the assert trace buffer, use get assertlog.txt.

For the current event log, use get eventlog.txt.

The file will transfer to the current directory specified on your computer’s

FTP utility. If running FTP from a DOS or Linux command line, the

Note: You may also need to specify the directory location on your

computer or network where your FTP program will store the

trace file.

Note: If the TC2201E is to use a static IP address, the default IP

address 1.1.1.1 should be changed to an address that is

appropriate for the IP network it will reside on. Note that the

default IP address can be used in a direct connection between

the TC2201E and the host computer via a crossover Ethernet

cable.

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 201 202

Sin comentarios

Quantum TC2201E Guía de usuario Pagina 178