Quantum PX502 Guía de usuario Pagina 102

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 294
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 101
Chapter 2 Basic Library Operations
OCP Components
Quantum PX500 Series User’s Guide 79
a To enable/disable DHCP, press Yes to enable DHCP or No to
disable DHCP. If your library is not connected to a network
which uses a DHCP server to assign IP information, disable this
function
b To set the IP address, subnet mask, and gateway, use the up and
down arrows to select the appropriate number and press
Enter to
accept.
3 When you are finished viewing/editing the network information,
press
Exit to return to the Setup screen.
Date and Time 2
To view or edit the date and time information:
1 From the Setup screen, use the up and down arrows to highlight Date
and Time
and press Enter.
The Date and Time screen displays (see figure 53):
Figure 53 Date and Time
Screen
2 Use the up and down arrows to view or edit the date and time
information. Press
Enter to advance to the next choice. After you have
edited the final setting (seconds), press
Save to accept the new
settings.
3 When you are finished viewing/editing the date and time
information, press
Exit to return to the Setup screen.
Note: For the network information such as the IP address to be
active, the library must reboot. To reboot the library, see
Reboot Library on page 141.
Vista de pagina 101
1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 293 294

Comentarios a estos manuales

Sin comentarios