Quantum L200 Guía de usuario Pagina 64

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 112
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 63
Chapter 4 Using the Library
Using Tape Cartridges
48 Quantum|ATL PowerStor L200 Series Library Users Guide
Cln Message 4
The Cln message may have indicate several problems (see
table 11
).
Table 11 Cln
Message Indications
Inserting Bar Code
Labels
4
The library is shipped with bar code labels that can be inserted into
the front slide slot (see figure 14
):
1 Orient the bar code label so that the numbers are on top, and
the writing faces outward.
2 Slide the label into the slot on the front of the tape cartridge.
Condition Possible Problem Recommended Action
Cln message is
displayed on the
OCP
The drive head may
be contaminated
If it is non-SDLT type
tape drive, clean the
drive head (see Using the
Cleaning Cartridge).
Repeated Cln
messages with
different data
cartridges
May indicate a
drive failure
Call your Quantum|ATL
service representative
Cln message is
displayed with a
particular cartridge
May indicate a
media problem in
the data cartridge
Replace the data
cartridge
Note: Be sure to use a cleaning label if it is a cleaning
cartridge.
Vista de pagina 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 111 112

Comentarios a estos manuales

Sin comentarios