Quantum L200 Guía de usuario descargar pdf (Pagina 75)

Chapter 6 Troubleshooting Guidelines

Operation Failure

Quantum|ATL PowerStor L200 Series Library User’s Guide 59

Operation Failure 6

Use the following guidelines if operation failure occurs.

Write-Operation

Failure

Some manual operations, if not performed correctly, may cause

write operations to fail.

For example:

• Loading any write-protected tape cartridges when executing

write operations

• Selecting the incorrect cartridge slot from which to initialize

operations

If an error does occur, read the OCP display to determine the

problem or call your Quantum|ATL Customer Support

representative.

Error Conditions 6

Depending on the error, the OCP may display an error message.

See appendix B, Error Messages and Definitions

for more

information.

If unable to determine the cause of the problem, call your

Quantum|ATL customer support representative.

Power Problems 6

If the OCP display is not active or your system does not recognize

the library:

• Verify that the power plug is secure

• Verify with your system manager that the library configuration

is correct

If the library power is disconnected when a cartridge is in transit

between the elevator and magazine, the cartridge is moved into

the magazine slot when power is restored.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 111 112

Sin comentarios

Quantum L200 Guía de usuario Pagina 75