Quantum Scalar i80 Guía de usuario descargar pdf (Pagina 286)

Chapter 9: Installing, Removing, and Replacing Components

Replacing the Chassis

258 Quantum Scalar i40 and Scalar i80 User’s Guide

14 If you removed the library from the rack to perform this procedure,

run the Installation and Verification Test (IVT) to ensure the Y-tray,

tape drives, and magazines are all functioning properly. From the

operator panel, select Tools > IVT and follow the instructions on

the screen. The IVT takes about 30 minutes. See

Running the

Installation and Verification Test (IVT) on page 325 for more

information about the IVT.

Replacing the Chassis

DISCLAIMER: Tests have been conducted on the finished product and

have passed Safety Regulatory requirements at time of test.

WARNING: For field/customer replaceable sub-assemblies, all

instructions pertaining to further integration and

operation verification such as those in this document

must be fully complied with. Do not attempt to operate

the product before the product is fully assembled and self

diagnostics show that the product passes, otherwise

serious physical injury may occur to the user. The

manufacturer(s) will not be held liable/responsible if such

precautions are not adhered to.

WARNING: Two people are required to safely lift the library into and

out of its packaging, a rack, or a desktop kit.

When you replace a library chassis, you will remove all the components

from your existing library and install them in the new library.

Required Tools • Phillips #1 screwdriver

• Magazine lock override tool — an opened paperclip, small

screwdriver, or other object (3.5 mm or less in diameter that will not

break off)

1 2 ... 281 282 283 284 285 286 287 288 289 290 291 ... 403 404

Sin comentarios

Quantum Scalar i80 Guía de usuario Pagina 286