
Chapter 3 Quantum PX720 Remote Management
Setup
Quantum PX720 User’s Guide 130
Figure 76 Devices Page
2 To change a SCSI ID, enter the ID number in the field next to the
device and click
Apply.
To change a drive SCSI ID, the cabinet must be off-line. To change a
cabinet (changer) SCSI ID, the library must be rebooted before the
new ID takes effect.
3 Click the drive link to view the drive details.
4 Click Save As... to save the SCSI setup information to a local
destination. Use the
Send... button to email the SCSI setup
information to one or more recipients.
Native Fibre Channel Tape Drives 3
Native Fibre Channel tape drives such as the HP LTO-2/-3 and Quantum
SDLT600/DLT-S4 can be directly connected to a Fibre Channel host or
network without a SCSI to Fibre Channel bridge. When native Fibre
Note: The drives are listed by logical index starting at 0 for each
partition.
Comentarios a estos manuales