
Chapter 3 Quantum PX720 Remote Management
Utilities
Quantum PX720 User’s Guide 182
To upload Fibre Channel bridge firmware:
1 Select the Upgrade check box for each bridge to be updated.
2 Enter a path and filename where the file exists, or click Browse.
3 Click Upload to upload the file.
The firmware image uploads to the library and reboots the bridge. A
progress window opens showing the current status of the firmware
upgrade.
4 After all bridges have been upgraded, click Refresh to rediscover
bridges and update the firmware revision.
Upgrade Drive Firmware 3
The upload drive firmware section allows the user to remotely upload
new drive firmware to the tape drive.
To upload tape drive firmware:
1 Enter a path and filename where the file exists, or click Browse to
locate the file.
2 Select the tape drive(s) to upgrade with new firmware. The file to be
uploaded must have a img extension.
3 Click Upload to upload the file.
After the file is uploaded, the drive(s) will be automatically upgraded
and then reset.
Note: The library must be offline to upgrade drive firmware.
Note: Only ADI enabled tape drives can be updated remotely.
Note: If multiple drives are selected, they must be of the same
type (all SDLT or all LTO). The tape drive upgrade process
takes approximately 30 minutes for each tape drive.
Comentarios a estos manuales