Quantum PX720 Guía de usuario Pagina 177

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 259
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 176
Chapter 3 Quantum PX720 Remote Management
Setup
Quantum PX720 User’s Guide 154
Editing a Library Partition 3
To edit a library partition:
1 Select the partition line under the Partitions section.
Unload Drives
Automatically
Select this box to automatically unload the tape
drives in the partition when the backup job is
complete.
Return Drive
Serial Numbers
to the Host
Select this box to return the tape drive serial
numbers to the host connected to this partition.
Identify as ATL
P7000
Select this box to return an ATL P7000 inquiry
string to the host connected to this partition. The
partition will appear to the host as an ALT P7000
tape library.
Prefix Media
Type in Barcode
Select this box to move the media type prefix
(LTO or SDLT) from the end of the barcode to the
beginning of the barcode.
Accept
Cartridges when
Move Fails and
Source is
Unknown
Select this box to allow the media changer to place
tape cartridges from an unknown source in the
partition if a move has failed. Only one partition
can have this setting active. This partition must
have available elements (cartridge bins) within the
partition.
Barcode Length
Set the Set the barcode length from 1-9 or 0 for all.
Note: The library must be offline to create or edit a library partition.
Field Description
Vista de pagina 176
1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 258 259

Comentarios a estos manuales

Sin comentarios