Quantum PX720 Guía de usuario Pagina 94

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 259
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 93
Chapter 2 Basic Library Operations
OCP Components
Quantum PX720 User’s Guide 71
To set the barcode length, use the up and down arrows to select
the barcode length and press
Select.
To enable autoclean, use the up and down arrows to select
Autoclean and press
Select.
To enable auto unload, use the up and down arrows to select
Auto unload and press
Select.
To configure the number of tape drives in the cabinet, use the up
and down arrows to select the number of drives and press
Select.
To configure the number of slots in the cabinet, use the up and
down arrows to select the number of slots and press
Select.
To enable the both the left and right load ports, use the up and
down arrows to select Both Load Ports and press
Select. The
library is automatically reconfigured.
To enable P7000 identity, use the up and down arrows to select
Identify as ATL P7000 and press
Select. This allows the host
computer to identify the cabinet as a P7000 library.
To enable the left load port, use the up and down arrows to select
Left Load Port and press
Select. The library is automatically
reconfigured.
To enable the right load port, use the up and down arrows to
select Right Load Port and press
Select.The library is
automatically reconfigured.
5 When you are finished viewing/editing the setup information, press
Back to return to the Menu screen.
Service Information/Options 2
The Service Information screen is used by Customer Service only.
Event Log Information 2
To view the event log:
Note: For the network information, tape drive configuration, and
number of slots to be active, the library must reboot.
Vista de pagina 93
1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 258 259

Comentarios a estos manuales

Sin comentarios