Quantum DLT 7 Manual descargar pdf (Pagina 79)

Chapter 7 Fibre Channel Interface

World-wide Names

DLT-S4 Product Manual 61

Table 33 Fibre Channel

Topology Configuration

World-wide Names 7

Each DLT-S4 tape drive contains two unique, 64-bit world-wide names: a

node name for the tape drive, and one for the tape drive’s Fibre Channel

port. The tape drive reports the world-wide names to the host through

the

INQUIRY Command (12h). See the DLT-S4 Interface Reference Guide

(81-81281-xx) for more information.

To Select This

Topology

Put Jumper on

These Pins Result

Arbitrated Loop 11 and 12 Tape drive attempts to initialize the link in FC Arbitrated

Loop topology only

Point-to-Point 9 and 10 Tape drive attempts to initialize the link in FC Point-to-Point

topology only

Auto-negotiate No jumpers Auto Topology: Tape drive attempts to

• first initialize in FC Arbitrated Loop topology

• then initialize in FC Point-to-Point topology

11 and 12

AND

9 and 10

Auto Topology: Tape drive attempts to

• first initialize in FC Arbitrated Loop topology

• then initialize in FC Point-to-Point topology

Note: Pins 1 and 2 are spare pins that are not used; there is no effect if they are jumpered or not

jumpered.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 176 177

Sin comentarios

Quantum DLT 7 Manual Pagina 79