Quantum LTO-4 (Model B) Información técnica descargar pdf (Pagina 6)

6 Installing the Internal LTO-4 (Model B) Half-Height Tape Drive

Product Name Quick Start Guide

Figure 3 Internal Parallel

SCSI Bus Termination

Examples

Tape drive

(no termination)

SCSI device

(termination

disabled)

SCSI controller

(termination

enabled)

SCSI device

(termination enabled)

Tape drive

(no termination)

SCSI controller

(termination enabled)

SCSI terminator

Note: The internal parallel SCSI LTO-4 (Model B) Half-Height Tape Drive does not provide

SCSI termination. The last device at the end of the parallel SCSI bus chain must have

a SCSI bus terminator.

6 After configuring the parallel SCSI ID and bus termination power, proceed to Mounting

the Internal Tape Drive in the following subsection.

Mounting the

Internal Tape Drive

You can mount the internal LTO-4 (Model B) Half-Height Tape Drive either horizontally or

vertically, but not upside down (see figure 4

Figure 4 Acceptable

Mounting Orientations

YES YES YES NO

IF you mount the drive . . . THEN the . . .

horizontally, base of the drive must be within 15 degrees of

horizontal.

vertically, side of the drive must be within 5 degrees of

horizontal.

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Sin comentarios

Quantum LTO-4 (Model B) Información técnica Pagina 6