Quantum ValueLoader Manual de usuario descargar pdf (Pagina 46)

Operating the ValueLoader

Creating an Inventory of Cartridges

32 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual

During the cleaning process, which can take several minutes, the

LCD screen displays

Drive Cleaning.

6 When tape drive cleaning is complete, the Clean Drive LED turns off

(if previously on) and the ValueLoader unloads and exports the

cleaning cartridge. Remove the cleaning cartridge, and press

[Enter]

when the LCD screen prompts you to do so.

7 If you had to remove a data cartridge to import the cleaning

cartridge, import that data cartridge to its original slot (see Importing

Cartridges on page 25).

Creating an Inventory of Cartridges 2

This option builds a new inventory of cartridges in the ValueLoader. If

using a bar code reader, this option also scans the bar code labels on each

cartridge in the carousel (see Bar Code Reader

on page 3). To use this

option, follow these steps:

1 From the Home screen or main menu, press the

[+] or [–] button until

Commands appears on the top line of the LCD screen.

2 Press

[Enter] to access the available options.

3 Press the

[+] or [–] button until Re-inventory appears on the LCD

screen. Press

[Enter].

The ValueLoader will then check the drive and each slot for the

presence of a tape in order to update inventory information.

Note: If the cartridge is not a valid cleaning cartridge, the LCD

screen will display

Bad clean tape and the cartridge will be

exported.

Note: If the Clean Drive or Media Attention LED is illuminated

again when you insert another cartridge immediately after

cleaning, see table 4

on page 46 to troubleshoot.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 87 88

Sin comentarios

Quantum ValueLoader Manual de usuario Pagina 46