Quantum ValueLoader Manual de usuario Pagina 51

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 88
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 50
ValueLoader Administration
Configuring the ValueLoader
ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 37
Circular Mode On/Off
. This option turns Circular Mode on or off, and is
used only when in Sequential Mode. When Circular Mode is on, after the
ValueLoader has cycled through all available cartridges, it then reloads
the original first cartridge in the sequence. If Circular Mode is turned off
and the last cartridge has been unloaded, the ValueLoader stops loading
cartridges until you manually load another cartridge.
To access this option, follow these steps:
1 From the Home screen or main menu, press the
[+] or [–] button until
Configuration appears on the top line of the LCD screen. Press the
[Enter] button to select.
2 Press the
[+] or [–] button until Circular Mode appears on the LCD
screen. The second line on the LCD screen indicates the current
status, either
On or Off.
3 Press the
[Enter] button. The LCD screen indicates whether you are
about to turn Circular Mode on or off.
4 Press the
[Enter] button to accept the change to Circular Mode or
[Cancel] to exit and not save the changes.
Autoload Mode On/Off. This option turns Autoload Mode on or off, and is
only used when in Sequential Mode. When Autoload Mode is on, the
ValueLoader automatically loads the cartridge from the lowest numbered
full slot into the tape drive when powered on. It then follows standard
sequential operation as described in Sequential Mode
on page 36.
To access this option, follow these steps:
1 From the Home screen or main menu, press the
[+] or [–] button until
Configuration appears on the top line of the LCD screen. Press the
[Enter] button to select.
2 Press the
[+] or [–] button until Autoload Mode appears on the screen.
The second line on the LCD screen displays the current status, either
On or Off.
Caution: Use caution when choosing Circular Mode as it makes it
possible to overwrite data on previously written
cartridges.
Vista de pagina 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 87 88

Comentarios a estos manuales

Sin comentarios