Quantum ValueLoader Manual de usuario descargar pdf (Pagina 49)

ValueLoader Administration

Configuring the ValueLoader

ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 35

To access this option, follow these steps:

1 From the Home screen or main menu, press the

[+] or [–] button until

Configuration appears on the top line of the LCD screen.

2 Press the

[Enter] button to select.

3 Press the

[+] or [–] button until Change SCSI ID appears on the LCD

screen. The second line displays the current SCSI ID.

4 Press the

[Enter] button. The second line on the LCD screen displays

New ID:.

5 Press the

[+] or [–] button until the desired SCSI ID is displayed.

6 Press the

[Enter] button. The LCD screen displays Please Cycle Power.

7 Turn off the ValueLoader. After a few seconds, turn it back on again.

The selected SCSI ID is now in effect.

Note: The ValueLoader will not respond to input from the

Operator ‘s Panel until the power has been cycled.

Note: If you changed the SCSI ID, you may also need to cycle power

on the host server and reconfigure your backup software

before you can use the ValueLoader. Consult your hardware

and software manuals for more information.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 87 88

Sin comentarios

Quantum ValueLoader Manual de usuario Pagina 49