Quantum Pathlight VX Guía de usuario descargar pdf (Pagina 55)

Pathlight VX Site Preparation Guide 51

Use one set of Table 38 and Table 39 for each I/O Blade.

Use Table 38

to prepare to configure the ports of the physical library. Each column in the table represents

an FC port on an I/O blade or SNC. The table represents a single SNC or I/O blade. There are six columns

because the Scalar i2000 has 6 ports. A Scalar i2000 with 8 drives would have two I/O blades, so the table

would have to be duplicated to make room to record the information for the second blade. The columns in

the table represent the ports that must be communicating with the Pathlight VX.

Table 37 Physical Library’s SNC SCSI Channel Parameters

Description SCSI 1 SCSI 2 SCSI 3 SCSI4

Channel Zoned FC 1:xxxx

Channel Zoned FC 2:xxxx

Channel Mode: Initiator Initiator Initiator Initiator

Initiator ID: 7777

Bus Reset on Power up: Enable Enable Enable Enable

Enable Termination: Enable Enable Enable Enable

Alternate Initiator ID: Auto Auto Auto Auto

Table 38 Physical Library’s I/O Blade Fibre Port Configurations

Description FC 1 FC 2 FC 3 FC 4 FC 5 FC 6

Loop ID:

Speed:

Frame Size:

Port Mode:

Public/Private:

Connection Type:

Table 39 Physical Library’s I/O Blade Channel Zone Configurations

Description FC 3 FC 4 FC 5 FC 6

Channel Zoned FC 1:xxxx

Channel Zoned FC 2:xxxx

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 71 72

Sin comentarios

Quantum Pathlight VX Guía de usuario Pagina 55