Quantum P1000 Guía de usuario Pagina 104

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 132
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 103
Chapter 6 Troubleshooting
Robotics Problems
88 ATL P1000 Series User’s Guide
Robotics Problems
6
Table 11 provides corrective actions for problems with the robotics.
Table 11 Robotics
Problems
Problem Corrective Action
The robot does not move at
power up.
1
Verify that all internal packing
materials were removed during
the installation procedure.
2
Check the Stop and Standby
buttons; be sure the library is on-
line and the Stop button is
released.
The gripper partially grips a
tape cartridge.
Issue a Move Cartridge command to
move the cartridge from the gripper to an
empty storage element.
The bar code reader on the
gripper fails.
1
Verify that nothing obstructs the
bar code reader.
2
Restart the library.
If the problem continues, contact an
authorized field service engineer.
The robot times out or fails
during an operation.
1
Verify that the tape cartridge
involved in the operation is
properly positioned in the bin or
drive and ready to be picked.
2
Check that the robot is not
obstructed in any way.
3
Retry the operation.
If it still fails, contact an authorized field
service engineer.
Vista de pagina 103
1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 131 132

Comentarios a estos manuales

Sin comentarios