Quantum P1000 Guía de usuario descargar pdf (Pagina 81)

Chapter 4 Operator Commands

Moving a Cartridge

ATL P1000 Series User’s Guide 65

Procedure (continued)

Identify the source element (the element containing the cartridge

to be moved):

Press the appropriate element button (Storage Bin, Tape Drive,

Load Port, or Gripper).

The GUI displays a range of addresses in the Range box (below

the Destination box).

Using the keypad, enter the address of the source element.

If you make a mistake inputting the address, press the

backspace button to erase the entry character by character.

Press the Select button.

The Source box displays the source information and the

Destination box becomes active.

Identify the destination element:

Press the appropriate element button (Storage Bin, Tape Drive,

Load Port, or Gripper).

The GUI displays a range of addresses in the Range box (below

the Destination box).

Using the keypad, enter the address of the source element.

If you make a mistake inputting the address, press the

backspace button to erase the entry character by character.

The destination information appears in the Destination box as

you type.

Press the Execute button to initiate the move.

The GUI displays a “Command In Progress” screen. When the

move is complete, the “Command In Progress” screen disappears.

To cancel the move, press the Abort button on the screen.

Press the Back button to return to the Operator screen.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 131 132

Sin comentarios

Quantum P1000 Guía de usuario Pagina 81